Codesys v3.x does not find my controller/device when I scan the network to login.
If no device is found when you scan the network before logging in to Codesys v3.x, you might have missed a step in the configuration, or changed something w...
Thu, 17 Sep, 2015 at 1:57 PM
I cant login to my Codesys v2.3 application / communication error / CAN problems
Set the "LoginType" setting properly (usually STW FF CAN). Make sure that the baudrate in PLC Config > CAN# > Module parameters is the sam...
Tue, 24 Apr, 2018 at 4:23 PM
How do I change the Gateway login Baudrate in CodesysV2.3?
- open CodesysV2.3 - go to: Online/Communication Parameters - select the communication channel to be edited - double click the value of the field "Baud...
Wed, 19 Aug, 2015 at 3:59 PM
How do I change the Gateway com dll path in CodesysV2.3?
In order to correct the path to the communication DLL, you can manually edit the path by double clicking it and editing it. Now the important part: you MUST...
Wed, 19 Aug, 2015 at 3:59 PM
How do I add an EDS file to my Codesys v2.3 project
(See attached image) Go to Project > Options. Go to the Directories category and in the "Project" block youll see Configuration Files. This is...
Mon, 20 Feb, 2017 at 2:58 PM
Why does my CodesysV3 - Kefex import fail?
The reason is a date format mismatch. Until this problem is solved, there is a workaround: open the XML file with an editor such as Notepad ++ loca...
Wed, 19 Aug, 2015 at 3:52 PM
How to Programmatically Cycle Power on My STW Controller?
Here is an example code on how to check for a specific CAN message in your Codesys application and then call the "SysClose" sub-routine to power d...
Tue, 18 Apr, 2017 at 2:07 PM
CAN installation and CoDeSys gateway troubleshooting guide
Fri, 15 Feb, 2019 at 1:10 PM
Codesys Installation and General Information
Wed, 6 Feb, 2019 at 10:31 AM
Installing multiple Codesys versions
Wed, 6 Feb, 2019 at 10:33 AM